Pines 5T Vertical Tube Bender Hydraulic Bender

$3,500.00

 

Used, in nice condition. This unit was taken out of a manufacturing facility that just recently closed down. You are buying this unit as seen in the pictures. we do not have any dies to go with this machine.

Teledyne Pines 5T G. O. # M-37704

Serial # 44362-7558

Round Tubing: Non-Ferrous, 25,000 psi (two): 1″ x .072″ (25.4 mm x 1.82 mm)
Mild Steel, Y.P. 40,000 psi (two): 1″ x .065″ (25.4 mm x 1.65 mm)
Stainless, Y.P. 60,000 psi (two): 1″ x .049″ (25.4 mm x 1.24 mm)
Square Tube: Mild Steel (two): 7/8″ x .035″ (22.2 mm x .889 mm)
Round Bar: Mild Steel (two): 5/8″ (15.8 mm)
Square Bar: Mild Steel (two): 1/2″ (12.7 mm)
Hydraulic Power: 5 Tons
Bends Per Hour: 2 Tubes, 1800/Hour
Maximum Capacity: 1″ x .065″ Wall, Steel Tube
Maximum Angle: 100 Degrees, Normal Tooling
Maximum C.L.R.: 4-1/2″, 90 Degrees Bend or Less
Minimum C.L.R.: Approx. 2 to 3 x Work Diameter
Height Floor to Dies: 40″
Motor Data: 20 HP

1 in stock

Quantity:

Description

Used, in nice condition. This unit was taken out of a manufacturing facility that just recently closed down. You are buying this unit as seen in the pictures. we do not have any dies to go with this machine.

Teledyne Pines 5T G. O. # M-37704

Serial # 44362-7558

Round Tubing: Non-Ferrous, 25,000 psi (two): 1″ x .072″ (25.4 mm x 1.82 mm)
Mild Steel, Y.P. 40,000 psi (two): 1″ x .065″ (25.4 mm x 1.65 mm)
Stainless, Y.P. 60,000 psi (two): 1″ x .049″ (25.4 mm x 1.24 mm)
Square Tube: Mild Steel (two): 7/8″ x .035″ (22.2 mm x .889 mm)
Round Bar: Mild Steel (two): 5/8″ (15.8 mm)
Square Bar: Mild Steel (two): 1/2″ (12.7 mm)
Hydraulic Power: 5 Tons
Bends Per Hour: 2 Tubes, 1800/Hour
Maximum Capacity: 1″ x .065″ Wall, Steel Tube
Maximum Angle: 100 Degrees, Normal Tooling
Maximum C.L.R.: 4-1/2″, 90 Degrees Bend or Less
Minimum C.L.R.: Approx. 2 to 3 x Work Diameter
Height Floor to Dies: 40″
Motor Data: 20 HP

Additional information

Weight 3500 lbs
Dimensions 96 × 48 × 60 in

There are no reviews yet.

Add your review